Integrity Restoration Explain Restoration from Water and Mold Damage

ORANGE PARK, FLORIDA, USA, November 30, 2020 /EINPresswire.com/ — When purchasing a brand-new house, you ought to think about getting a mold and mildew evaluation. Mold evaluation is a different procedure from regular housing assessments. The expense will certainly differ depending on the dimension of your home. Exactly how much do mold and mildew evaluation cost on a home? Exactly how do you understand if it is worth it to conduct a mold inspection and screen? There are a few different situations in which you may want a mold examination.

Mold is a fungus, and like all fungi, it thrives in moist locations. Mold spreads by giving off spores, microscopic fragments typically as little as a single cell. Spores float about in the air till they land on a surface area. Mold spores are anywhere, outdoors, in addition to within your residence.

Fortunately, mold spores only develop mold and mildew when they come down on a moist surface. That means that if you can maintain the interior of your home dry, you can avoid having any trouble with mold. The ideal method to prevent decay in your house is to clean up spills, repair service leaks in your roof, plumbing, or HEATING AND COOLING system, and make sure your bathroom and kitchen are correctly airing vent dampness away from the house.

One good idea concerning mold- if you can see it, you have mold in your house. Seeing mold in the cracks and edges of your walls indicates it is growing and spreading out more spores. Remember that mold may also expand in locations you cannot see, such as in your air ducts or between your wall surfaces.

A few scenarios should make you find any mold and mildew issues in your residence—water damage. If your cellar flooded, roofing dripped, or a damaged pipeline splashed water all over the kitchen, you need to inspect for mold. Any place that got damp and was not swiftly dried (within 24 to 2 days) could become infected by mold and mildew.

There is no means to know what sort of water damages may have occurred where you are planning to acquire. The only way to figure out if mold and mildew exist is to do a mold inspection. After a home has been vacant, if a residence has been closed up and empties for months or years, moisture might have built up inside and triggered mold to grow.

After mold removal, if you have experienced the commonly pricey and hard steps to manage a mold issue, routine mold evaluations are a great idea to ensure you get rid of all of it. You see some mold. If you notice some eco-friendly, blue, black, or white stuff expanding in your home, do a mold and mildew examination to see if you locate it all.

If you are investigating mold and mildew, you could discover different solutions and costs that list both mold and mildew examination and mold testing. Mold and mildew examination merely identifies the existence of mold and generally specifies the issue's dimension, typically in square footage. Mold and mildew screening tries to determine what particular sort of mold remains in your residence as well as the number of mold and mildew spores are in the air.

Second, all interior areas have mold and mildew spores that wander in from outdoors, so mold and mildew examinations will usually provide a lengthy checklist of species, a lot of which are not expanding in your home. Third, the EPA has set no standards for an acceptable amount of mold and mildew or mold and mildew spores in a house.

Remember that some mold inspections include mold screening or sampling, specifically in states where it will need regulation. Mold and mildew examination is, essentially, an aesthetic assessment of a house. There are no unique tools involved apart from a great flashlight and devices that are sometimes needed to access restricted areas (like eliminating grates to examine HVAC ducts).

A moisture meter may likewise work in determining if a particular area is wet, specifically after removal. A typical mold and mildew evaluation entails the examiner chatting to the homeowner regarding any locations where they have seen mold or where there have been moisture issues or water damage in the past.

If there is a chance mold and mildew is growing hard to reach the area, the assessor may need to damage a section of drywall or eliminate paneling to obtain a much better look. If he identifies the mold, the inspector will look for the moisture source causing the mold and mildew and talk with the homeowner to establish a remediation plan.

For more information on Integrity Restoration and their restoration service, please visit https://integrestoration.com/

Media Relations
Integrity Restoration
+1 (904) 644-7878
email us here


Source: EIN Presswire

Perrin Conferences’ Annual New York Asbestos Litigation Conference Returns This December

The 2020 New York Asbestos Litigation Conference will be held virtually on December 8, 2020.

We’re excited to host prominent plaintiff and defense attorneys, judges, in-house counsel, and insurance professionals at this annual conference.”

— Lynnsey Perrin, President & CEO of Perrin Conferences

WAYNE, PENNSYLVANIA, UNITED STATES, November 30, 2020 /EINPresswire.com/ — Perrin Conferences has announced its virtual 2020 New York Asbestos Litigation Conference to be held on December 8, 2020. This conference will once again bring together leading attorneys and industry professionals for noteworthy panels and key discussions focused on New York asbestos litigation.

This year’s New York focused agenda will feature updates and perspectives on the current issues and outlook for 2021 in New York metro and upstate New York, appellate and summary judgment decisions, an update on talc litigation, a panel offering the judicial perspective, trials during COVID-19 and ethical issues to consider, and much more.

“We’re excited to host prominent plaintiff and defense attorneys, judges, in-house counsel, and insurance professionals at this annual conference. While we will miss the live aspect of this conference, we are bringing the same high-caliber speakers and trending topics to our audience,” said Lynnsey Perrin, President & CEO of Perrin Conferences.

This year’s conferences chairs are:
• Jennifer Wilcox Darger, Esq. Darger Errante Yavitz & Blau
• Charles M. Ferguson, Esq. Weitz & Luxenberg P.C.
• Paul Slater, Esq., Senior Counsel General Electric Company, Fairfield, CT

Speakers at the conference include:
• Joseph W. Belluck, Esq., Belluck & Fox, L.L.P., New York, NY
• Jerome H. Block, Esq., Levy Konigsberg LLP, New York, NY
• Daniel P. Blouin, Esq., Simmons Hanly Conroy LLC, New York, NY
• Patti L. Burshtyn, Esq., Weitz & Luxenberg, P.C., New York, NY
• Bernadette W. Catalana, Esq., MG+M The Law Firm, New York, NY
• Casey Chamra, Esq., O'Toole Scrivo, LLC, Cedar Grove, NJ
• Kerryann M. Cook, Esq., The Cook Group, New York, NY
• Meagan E. Dean, Esq., McGivney Kluger Clark & Intoccia, P.C., New York, NY
• Stephanie A. DiVita, Esq., The Law Firm of Pascarella DiVita
• Seth A. Dymond, Esq., Belluck & Fox, L.L.P., New York, NY
• Brian Early, Esq., The Early Law Firm, L.L.C., New York, NY
• Jordan Fox, Esq., Belluck & Fox, L.L.P., New York, NY
• Alani Golanski, Esq., Director, Appellate Litigation Unit, Weitz & Luxenberg, P.C., New York, NY
• David J. Goodearl, Esq., Leader Berkon Colao & Silverstein LLP, New York, NY
• Suzanne M. Halbardier, Esq., Barry McTiernan & Moore LLC, New York, NY
• Robert I. Komitor, Esq., Levy Konigsberg LLP, New York, NY
• Danny R. Kraft, Jr., Esq., Weitz & Luxenberg P.C., New York, NY
• Jonathan B. Kromberg, Esq., Darger Errante Yavitz & Blau, New York, NY
• Bridget Longoria, Esq., Assistant Vice President, Resolute Management Inc., Philadelphia, PA
• Stephen Novakidis, Esq., Foley & Mansfield, New York, NY
• Shelley Rossoff Olsen, Esq., Special Master, NYCAL, New York, NY
• Michelle Potter, Vice President, KCIC, Washington, DC
• Judith A. Yavitz, Esq., Darger Errante Yavitz & Blau LLP, New York, NY

Participating Judges include:
• Honorable Lucy Billings, Supreme Court of the State of New York, New York, NY
• Honorable Margaret A. Chan, Supreme Court, Civil Branch, New York, NY
• Hon. Erin P. Gall, Oneida County Supreme Court, Utica, NY
• Honorable Gerald Lebovits, Supreme Court of the State of New York, New York, NY
• Honorable Verna L. Saunders, Supreme Court of the State of New York, New York, NY
• Honorable Adam Silvera, Asbestos Coordinating Judge, Supreme Court of the State of New York, New York, NY

The conference also offers Continuing Legal Education (CLE) Credit and CE Adjuster Credit for qualified candidates. CE Adjuster Credit is pending in Texas and Florida. Please contact Bethany Corio at bcorio@perrinconferences.com if you have any questions regarding accreditation.
For more details on registration, please contact Lynnsey Perrin at lperrin@perrinconferences.com or visit the Perrin Conferences website at www.perrinconferences.com.

About Perrin Conferences
The leading national provider of joint plaintiff/defendant litigation conferences, Perrin Conferences offers comprehensive and specialized continuing legal education both virtual and live in an atmosphere of learning, networking, and sharing. Bringing together preeminent national talent in specialty legal fields, Perrin Conferences ensures its conferences deliver innovative content, networking opportunities, and career development. Attendees gain insights that cannot be found anywhere else. Follow the latest news from Perrin Conferences on LinkedIn at https://www.linkedin.com/company/perrin-conferences-llc or Twitter @PerrinConf. For more information on the company and upcoming conferences please visit www.perrinconferences.com.

Contact:
Amy Williams
Perrin Conferences
908-612-3586
awilliams@perrinconferences.com

Amy Williams
Perrin Conferences
+1 9086123586
email us here


Source: EIN Presswire

Pack and Load Services Announces Expansion and Moving Service Providers Recruiting Initiative

Pack and Load Services, a leader in the moving and storage industry, announced today that it is recruiting moving service providers across multiple markets.

Pack and Load Services is looking for partners that are passionate about providing high levels of service to people during the stressful time of moving belongings or relocating family.”

— Jed Prescott, Director of Marketing and Analytics at Pack and Load Services

LARGO, FL, UNITED STATES, November 30, 2020 /EINPresswire.com/ — Pack and Load Services, a national leader in the moving and storage industry, announced today that it has experienced a period of record growth and is actively recruiting moving service providers across multiple markets. The recruiting initiative will expand the firm’s footprint and allow the company to better serve both major metropolitan areas and rural markets. The firm is particularly focused on finding partners in high trafficked states such as California, Washington, Oregon, New York, Texas, Florida, and Illinois.

Pack and Load Services has been working to differentiate itself as the moving and storage industry’s leader in customer service. Those efforts were rewarded when COVID-19 caused an increase in interstate moves due to changes in workplace dynamics. Individuals are rapidly moving away from large metropolitan areas to more cost effective and quality of life driven regions. They are looking for well respected moving and storage companies in which they can entrust with their belongings. Pack and Load Services operational procedures, reputation, and A rating with the Better Business Bureau has separated the organization from others in the industry.

Pew Research Center has estimated that one-in-five U.S. adults (22%) have either changed their residence due to the pandemic or know someone who did.

“We are excited about our growth and expansion,” said Jed Prescott, Director of Marketing and Analytics at Pack and Load Services. “Pack and Load Services is looking for partners that are passionate about providing high levels of service to people during the stressful time of moving belongings or relocating family.”

About Pack and Load Services
With more than 65 years of combined experience in the moving and storage industry, Pack and Load Services prides itself on the unique ability to provide a full-service “pack-move-store” offering to its customers as they prepare their items for transport. Pack and Load Services is a premiere strategic partner of Portable On Demand Storage (“PODS”) with a presence across the domestic United States as well as in many parts of Canada. Headquartered in Largo, Florida, Pack and Load Services and its staff centrally manage and operate the Organization from this single location.

Jed Prescott
Pack and Load Services
+1 727-871-9664
email us here


Source: EIN Presswire

Indiana Mesothelioma Victims Center Urges the Family of a Navy Veteran with Mesothelioma in Indiana to not Gamble on Compensation and to Call Attorney Erik Karst of Karst von Oiste For Much Better Compensation Results

"We are urging the family of a Navy Veteran with mesothelioma in Indiana to not gamble on compensation and to call attorney Erik Karst of the law firm of Karst von Oiste at 800-714-0303.”

— Indiana Mesothelioma Victims Center

INDIANAPOLIS , INDIANA , USA, November 30, 2020 /EINPresswire.com/ — The Indiana Mesothelioma Victims Center says, "We are urging the wife or family of a Navy Veteran or person with mesothelioma in Indiana to not roll the dice on financial compensation for your loved one and to call attorney Erik Karst of the law firm of Karst von Oiste at 800-714-0303 for specific answers to your questions about financial compensation for this rare cancer caused by asbestos exposure. The Internet is loaded with a minefield of attorney ads featuring 'free' booklets, guides, kits, calculators-one minute do it your self-compensation-and other complete nonsense.

"We want a person with mesothelioma in Indiana to receive the best possible financial compensation-we do not want them to get around the clock phone calls from lawyers hoping to sign up a new client. Erik Karst is one of the nation's leading mesothelioma attorneys, he and his colleagues at Karst von Oiste have been assisting people with mesothelioma nationwide for decades and they are responsible for over a billion dollars in compensation results for people like this. Before a person with mesothelioma in Indiana hires a lawyer to assist with compensation please call attorney Erik Karst of the law firm of Karst von Oiste at 800-714-0303-we think you will be glad you did." www.karstvonoiste.com

The Indiana Mesothelioma Victims Center’s unsurpassed services for diagnosed people with mesothelioma in Indiana is a statewide initiative and available to a diagnosed person with mesothelioma in communities such as Indianapolis, Fort Wayne, Evansville, South Bend, Hammond, or Bloomington. https://Indiana.MesotheliomaVictimsCenter.Com

Mesothelioma is caused by exposure to asbestos. High- risk work groups for exposure to asbestos in Indiana include US Navy Veterans, power plant workers, oil refinery workers, steel mill workers, manufacturing, or industrial workers, plumbers, electricians, auto mechanics, machinists, or construction workers. In most instances, the diagnosed person’s exposure to asbestos occurred in the 1950’s, 1960’s, 1970’s, or 1980’s. www.karstvonoiste.com

For the best possible mesothelioma treatment options in Indiana the Indiana Mesothelioma Victims Center strongly recommends the following heath care facility with the offer to help a diagnosed victim, or their family get to the right physicians at this hospital: Purdue University Center for Cancer Research West Lafayette, Indiana: https://www.purdue.edu/cancer-research/index.php.

The states indicated with the highest incidence of mesothelioma include Maine, Massachusetts, Connecticut, Maryland, New Jersey, Pennsylvania, Ohio, West Virginia, Virginia, Michigan, Illinois, Minnesota, Louisiana, Washington, and Oregon. Mesothelioma also happens in Indiana as the Center would like to explain anytime at 800-714-0303. https://Indiana.MesotheliomaVictimsCenter.com

For more information about mesothelioma please refer to the National Institutes of Health’s web site related to this rare form of cancer: https://www.cancer.gov/types/mesothelioma.

Michael Thomas
Indiana Mesothelioma Victims Center
+1 800-714-0303
email us here


Source: EIN Presswire

Connecticut US Navy Veterans Mesothelioma Advocate Has Endorsed Attorney Erik Karst to be the-Go To-Lawyer for the Best Compensation Results for a Navy Veteran with Mesothelioma in Connecticut-Don't Settle for Less

Connecticut

"We want a Navy Veteran with mesothelioma in Connecticut to focus on compensation and before they hire a lawyer to assist with the financial claim to call attorney Erik Karst of Karst von Oiste.”

— Connecticut US Navy Veterans Mesothelioma Advocate

NEW LONDON, CONNECTICUT , USA, November 30, 2020 /EINPresswire.com/ — The Connecticut US Navy Veterans Mesothelioma Advocate has endorsed attorney Erik Karst of the law firm of Karst von Oiste to be the-go to- lawyer for a Navy Veteran with mesothelioma in Connecticut or their immediate family. Erik Karst is one of the nation's leading mesothelioma attorneys and he specializes in assisting Navy Veterans with mesothelioma because of asbestos exposure on a navy submarine, ship or at a shipyard. Financial compensation for a person like this might exceed a million dollars as Erik Karst is always happy to explain at 800-714-0303. www.karstvonoiste.com/

The Advocate says, "We want a Navy Veteran with mesothelioma in Connecticut or their family to focus on compensation and before they hire a lawyer to assist with the financial claim to please call attorney Erik Karst of Karst von Oiste at 800-714-0303. We think you will be glad you did." www.karstvonoiste.com/

The US Navy Veterans Mesothelioma Advocate is now offering to assist a Navy Veteran who now has mesothelioma to get possible VA Benefits for their illness. The Advocate will assist a Navy Veteran who has mesothelioma with their initial VA claims submission-and there is no charge for this service. For more information, a Navy Veteran with mesothelioma who had heavy exposure to asbestos in the navy prior to 1982 is welcome to call the Advocate anytime at 800-714-0303. https://USNavyMesothelioma.Com

The Connecticut US Navy Veterans Mesothelioma Advocate offers their free services to US Navy Veterans with mesothelioma in Bridgeport, New Haven, Hartford, Stamford, Waterbury, Norwalk, Danbury, New London, Groton or anywhere in Connecticut. https://Connecticut.USNavyMesothelioma.Com

For the best possible treatment options in Connecticut the Connecticut US Navy Veterans Mesothelioma Advocate strongly recommends the following heath care facilities with the offer to help a diagnosed Veteran, or their family get to the right physicians at these hospitals.

* Yale Cancer Center New Haven, Connecticut http://www.yalecancercenter.org/

* Hartford Hospital Hartford, Connecticut: http://www.harthosp.org/Cancer/default.aspx

About one third of all US citizens diagnosed with mesothelioma each year are Veterans of the US Navy. Before a Navy Veteran with mesothelioma or their family retain the services of a lawyer or law firm they are urged to call the US Navy Veterans Mesothelioma Advocate anytime at 800-714-0303. https:// USNavyMesothelioma.Com

The states with the highest incidence of mesothelioma include Maine, Massachusetts, Connecticut, Maryland, New Jersey, Pennsylvania, Ohio, West Virginia, Virginia, Michigan, Illinois, Minnesota, Louisiana, Washington, and Oregon. www.karstvonoiste.com/

For more information about mesothelioma please refer to the National Institutes of Health’s web site related to this rare form of cancer: https://www.cancer.gov/types/mesothelioma

Michael Thomas
Connecticut US Navy Veterans Mesothelioma Advocate
+1 800-714-0303
email us here


Source: EIN Presswire

The VR PluraView Monitor in use with Softwise Cadmium

Professional 3D stereo visualization for BIM, GIS & Engineering

MIESBACH, BAYERN, DEUTSCHLAND, November 30, 2020 /EINPresswire.com/ — The engineering sector for BIM, GIS, CAD and LiDAR technology now has many more capabilities: The combination of Softwise Cadmium software and the VR PluraView monitor enables a completely new range of applications through stereoscopic viewing. As an integrated hardware and software 3D-stereo solution, it fully ensures real-time processing and stereoscopic visualization of very large 3D CAD models and 3D laser scans.

In the industrial environment, the amount of digital data is continuously growing. Computer-Aided Design models can now reach sizes that are well above the main memory capacity of standard PCs. Softwise has developed a 3D visualization software for engineers that allows such models to be displayed interactively at any speed and level of detail. In combination with the VR PluraView Monitor, a stereoscopic 3D workplace solution is created for the visualization of very large CAD and BIM models, combined with 3D laser point clouds. With unlimited model size, detailed representations can be reproduced extremely faithfully. A real revolution in engineering:

• 3D design verification and decision support
• Integrated support for VR head-tracking on the PluraView
• Designed for Building Information Modeling (BIM), GIS and engineering
• Representation of very large area GIS models with dynamically focused, detailed representations
• Multi-CAD and 3D laser scans in a single model
• Measuring, cut planes, layer show / hide, search functionality and much more

Josef Johannes Schneider
Schneider Digital Josef J. Schneider e. K.
+49 8025 99300
email us here


Source: EIN Presswire

Worldsensing strengthens industrial infrastructure monitoring focus with CMT

Two civil engineers talking and laughing with one holding a tablet.

Worldensing enables civil engineers to monitor critical infrastructures remotely.

Blue Worldsensing company logo 2020

Worldsensing company logo

Industrial monitoring leader launches Loadsensing Connectivity Management Tool and further strengthens global commercial team.

Our aim now is to build on our experience in transforming operations and tackle the fundamental mission of keeping people safe by monitoring assets in mining, construction, rail and beyond.”

— Ignasi Vilajosana, CEO

BARCELONA, BARCELONA, CATALUNYA, November 30, 2020 /EINPresswire.com/ — CMT gives engineers a unique cloud-based hub to manage devices, data and networks, building on Loadsensing’s industry-leading wireless network technology for the acquisition of near real-time geotechnical, geospatial and structural sensor information. “Our vision for CMT is to help our partners monitor geotech projects more efficiently,” said Albert Zaragoza, Worldsensing’s Chief Technology Officer.

“It will help them stay on top of their network, node and sensor performance and manage a variety of monitoring projects remotely, from the comfort of their office, through a single pane of glass.”

More than 270 engineering consultancies and monitoring technology providers worldwide already use Loadsensing to improve the safety of critical infrastructure. Within mining, construction, rail and structural health management, CMT addresses engineers’ need to automate monitoring projects through the cloud, reducing the need for site visits and improving safety while reducing costs.

“We know many of our partners monitor projects using spreadsheets, which can be daunting,” said Bernat Trias, director of products at Worldsensing. “We can automate parts of the process so they can focus on what matters the most, which is to ensure the construction process or existing infrastructures are safe.”

Connected with CMT, and to offer additional value to engineering service providers, Worldsensing has built a strong alliance partner network that includes data visualization software experts such as Vista Data Vision, Maxwell Geosystem and Intelltech. Worldsensing is also bundling Loadsensing with IDS GeoRadar by Hexagon and integrating the technology into Hexagon’s digital mining geomonitoring hub, HxGN.

Alongside the CMT launch, Worldsensing has just welcomed Cameron Clark as its new sales area manager for Canada. His long experience and expertise will help support Loadsensing’s growth, especially in mining. The hire represents a further strengthening of Worldsensing’s global team, which recently saw the addition of geotechnical expert Kelsey Kidd to lead North American sales, a mining engineer Leonardo Vidigal to cover the fast-growing Brazilian market and Yvan Bonin focusing on Africa. Worldsensing CEO Ignasi Vilajosana said the business was gearing up to meet soaring demand for industrial monitoring networks after selling its non-core Fastprk and OneMind business units this year.

“The Fastprk and OneMind sales this year leave us perfectly positioned to become the world leader in critical infrastructure monitoring,” said Vilajosana. “Our aim now is to build on our experience in transforming operations and tackle the fundamental mission of keeping people safe by monitoring assets in mining, construction, rail and beyond.”

The key to strengthening the Worldsensing positioning will be the ongoing development of its leading industrial monitoring solution, Loadsensing, to become the underlying platform of choice for monitoring critical infrastructures worldwide. Loadsensing was Worldsensing’s first industrial IoT product, launched as a data logger system in 2015. It has now evolved into a complete wireless solution that supports more than 170,000 sensors in more than 1,000 networks across more than 60 countries worldwide.

“We are seeing a surge in demand for Loadsensing network solutions as the markets recognize the valuable contribution that this technology can make to operational safety,” said Steve Cahill, Worldsensing’s Chief Operating Officer. “In recent years we have seen rapid adoption of the Loadsensing solution across a wide range of industry sectors. Working in close collaboration with our Partners, we continue to develop our Loadsensing capability, to help create an ever safer and more efficient working environment for our customers.

The Loadsensing connectivity-centric​ industrial monitoring offering has already been certified for use in environments as diverse as high-speed railway construction sites in the UK and mining company tailings dams in Brazil.

“We see safeguarding critical infrastructures as a mission that we are uniquely positioned to deliver on,” said Vilajosana. “At this point in our growth it makes sense to focus all our efforts on this particular market opportunity.”

Jennifer Harth
Worldsensing
+34 934 18 05 85
email us here
Visit us on social media:
LinkedIn


Source: EIN Presswire

SHINING’s Compact Terminal Block, Installation Made-Easy For All Applications

NEW TAIPEI CITY, TAIWAN, November 30, 2020 /EINPresswire.com/ — SHINING’s Compact Terminal Block, Installation Made-Easy For All Applications

SHINING E&E Industrial Co., Ltd. leads the way in professional terminal block, fuse holder, fuse block, and solid state relay manufacturing. The company will be showcasing its new product, Fixed Type Barrier Terminal Strip, a SHINING TB-3XXXXCP Series product that significantly shortens the time for installation at various events in 2021.

The breakthrough strip all-purpose protection cover design can be utilized on both commercial and industrial appliances. It has significantly improved the way customers fasten the screws. SHINING is dedicated to delivering not only general model type but diverse customized designed products that are too UL/CUL certified and CE/RoHS compliant.

Competitive Advantage:
• Panel Mounted Terminal blocks with diverse applications
• Open-hole protective cover for easier screw installations
• High density circuitry capable to conserve panel space
• UL requirements approved

About SHINING E&E Industrial Co., Ltd.
Founded in 1978, SHINING E&E Industrial Co., Ltd. has endeavored to the design and fabrication of plastic-related products for more than 40 years. It has been working closely as an OEM/ODM with both domestic and global leading enterprises, such as TECO, TAIAN, Wal-Mart, Kmart, Target, Springs, and Sears. SHINING aims to consistently provide the best quality products and services to its customers and currently have established a wide network of business partnerships encompassing the regions from North America, South America, Europe, Asia, to Australia. For more information, please visit https://www.terminalsblocks.com/.

Additional Information:
Press Kit download: https://brand.sparkamplify.com/shining-e-and-e-industrial-co-ltd-terminal-blocks-solution
Facebook: https://www.facebook.com/shiningfans/
LinkedIn: https://www.linkedin.com/in/david-lin-120b012/

###
Media contact: David Lin
Email: sales@shining.com.tw
Phone: +886-2-2221-7858 #103

David Lin
SHINING E&E Industrial Co., Ltd.
+886 2-2221-7858
email us here
Visit us on social media:
Facebook
LinkedIn


Source: EIN Presswire

Proper Accounting is Critical for EB-5 Investor Visas, Experts to Give Best Practices Webinar

The EB-5 investor visa is used by many foreign nationals to obtain U.S. residency. This webinar explains best practices for EB-5 fund accounting.

NEW YORK, NEW YORK, UNITED STATES OF AMERICA, November 30, 2020 /EINPresswire.com/ — EB5 Affiliate Network (EB5AN), a leading EB-5 consultancy, regional center operator, and fund manager, will host a free webinar, “EB-5 Project and Investor Financial Accounting – Best Practices for Compliance” with guest panelist Jana Aristizabal, CPA, on Thursday, December 3, at 2:00 PM EST. Click here to register now. Space is limited.

An EB-5 visa requires a minimum investment of $900,000 or $1.8 million. Once invested, the EB-5 fund manager must perform financial accounting at the project level and issue investor-specific documents, such as Form K-1, to the EB-5 investors. In addition to reporting any income or loss on the investment, keeping detailed and accurate financial records is critical to the success of the investors’ immigration petitions. U.S. Citizenship and Immigration Services (USCIS) applies considerable scrutiny during the adjudication process, so it is imperative that EB-5 investors have convincing evidence that their capital was fully at risk for the entirety of the immigration process.

“The EB-5 visa is a very good option for foreign nationals seeking U.S. residency. If the investment is chosen carefully, it is a certain path to a green card. Investors need to select a project that has a transparent financial accounting process to ensure that all required financial documents are available for the EB05 investor to successfully complete the EB-5 visa immigration process.” said Sam Silverman, managing partner of EB5AN.

Created by the U.S. Congress in 1990, the EB-5 program provides a clear pathway to permanent residency and citizenship. Tens of thousands of families from nearly every country have successfully immigrated by making qualifying investments in U.S. projects and business enterprises. The EB-5 visa is popular among people currently living abroad as well as those already working in the U.S. on nonimmigrant visas.

*****

EB5 Affiliate Network is a national EB-5 regional center operator and consulting firm with more than $900 million in EB-5 investment capital across a network of 14 approved regional centers covering more than 20 states. EB5AN works with project developers and sponsors to assemble high-quality EB-5 projects across the country. EB5AN also works with EB-5 investors from around the world to identify high-quality, low-risk EB-5 investments and to structure EB-5 projects for those who seek to create their own.

Jana Aristizabal is a partner in Marcum LLP’s tax and business services division. She has more than 15 years of professional accounting experience, during which has focused on federal and state tax consulting and compliance services to corporations, partnerships, and individuals. Ms. Aristizabal has worked on complex tax issues in IRS audits, business reorganizations, acquisitions, and international transactions in a wide variety of industries, including many EB-5 regional centers and project sponsors.

Jeremy Shackle
EB5AN
+1 800-288-9138
email us here


Source: EIN Presswire

A New Partnership in the Horizon: UK Aerospace Giant and an Australian Defence Broker & Advanced Manufacturing Company

Glossy golden color globe with three pointe white strippes from the left side of the globe toward the right side but not quiet reaching the right side, with a pointed end.

Glaive International Defence Pty Ltd

Marques Aviation Ltd

Oxford Aerospace Academy

Glaive International Defence Pty. Ltd. and Marques Aviation Ltd. aerospace and defence companies announce an R&D, manufacturing and commercial partnership

SYDNEY, NEW SOUTH WALES, AUSTRALIA, November 30, 2020 /EINPresswire.com/ — Glaive International Defence Pty. Ltd. (Sydney, Australia) and Marques Aviation Ltd. (London, UK) aerospace and defence companies are proud to announce an R&D, manufacturing and commercial partnership which will see Glaive International Defence manufacture advanced UAVs in Australia.

This new partnership between Glaive International Defence and Marques Aviation is set to send some ripples among the Aerospace and Defence Industries, as it lays the foundation of new and upcoming innovations in this sector. Glaive International Defence Pty Ltd, a 100% Australian owned company and Defence Technology Broker licensed by the Australian Defence Department has evolved to manufacture high-end commercial and military unmanned aircraft. The new partnership with Marques Aviation represents a great example of Technology Transfer (TT) reinforced by excellent support from the Australian State & Federal Governments to develop manufacturing capability.

Marques Aviation Ltd is a global aerospace company that provides innovative systems, products and solutions in unmanned aircraft systems to governments and commercial clients worldwide. Its team has over 30 years experience in aircraft design and the development of innovative aerospace technologies. The philosophy underlying engineering practice at Marques Aviation Ltd emphasises innovation to develop advanced high-performance unmanned aircraft. The Marques Aviation Group incorporates the Oxford Aerospace Academy which hosts its Oxford Aerospace Research Centre (OARC-UK), a platform that coordinates international R&D consortia for the development of forward-thinking aerospace technologies. OARC-UK will provide R&D programs and education and training via Glaive International Defence’s facilities in Australia.

This new venture will see the creation of Glaive’s new technological Defence Hub in regional Australia, including a new aircraft manufacturing plant and the creation of dozens of local jobs, therefore boosting the local economy. Glaive International Defence’s Founder & CEO, Vincent Marty, said “the collaboration responded to an increasing drive and demand for enterprises to reboot and reposition defence manufacturing in Australia. Acquiring advanced technology in the Defence Industry, manufacturing such high-performance UAVs in Australia, and helping reboot the local economy which has suffered due to Covid-19, falls in line with the Australian Government and the Australian Defence vision of restoring Australian manufacturing and defence sovereignty.”

This technology partnership between Marques Aviation and Glaive International Defence epitomises the beginning of a new exciting era for both companies which will realise the production of innovative ecological unmanned aerial platforms of medium-size characterised by hybrid solar-hydrogen-battery energy systems, AI sensor fusion, AI swarming, smart multi-function materials, intelligent structures and health monitoring, digital cloud based Unmanned Traffic Management (UTM), and Augmented Reality/Virtual Reality (AR/VR) training underpinned by dedicated R&D programs.

Dr Pascual Marques, president of Marques Aviation Ltd – UK, said “We hold ourselves to a high standard in the products we deliver and in the way we conduct ourselves throughout the entire client experience. Our mission is to be at the forefront of technology and innovation, delivering superior capability and maximised cost efficiency” – adding that “the new Glaive’s Technological Defence Hub in regional Australia will serve as a nucleus for the manufacturing of advanced aerospace technologies based on Industry 4.0 large-scale M2M, and Internet-of-Things (IoT) automated and self-monitoring manufacturing principles, high-level business deals facilitation, and training and education in the unmanned aerospace sector”.

Glaive International Defence Pty Ltd
info@glaive.com.au
Tel: +61 434499125 / +61 479152168
www.glaive.com.au

Marques Aviation Ltd
sales@marquesaviation.com
Tel: +44 (0)7721 784411
www.marquesaviation.com

Vincent Marty
Glaive International Defence Pty Ltd
+61 434 499 125
email us here
Visit us on social media:
LinkedIn

Glaive International Defence & Marques Aviation – partnership presentation


Source: EIN Presswire